Can't Open PlainApp in Your Browser?
Works on Windows, Mac, Linux, Chromebook — any device with a browser
Don't worry — this is almost always a simple network issue. Follow the steps below to find and fix the problem in minutes.
Quick Self-Diagnosis
Go through these checks one by one. Most issues are solved by Step 1 or Step 2.
Is PlainApp running on your phone?
Open PlainApp on your Android phone. Make sure the service is started and you can see a web address on the screen (like http://192.168.x.x:8080 or https://192.168.x.x:8443). If not, tap the Start button. Also check if the app shows any error messages — if it does, try restarting the service.
Can the phone itself open the page?
On your phone, open a browser (Chrome, Firefox, etc.) and type the same address shown in PlainApp. If the phone's own browser can't open it, the PlainApp service itself has a problem — try restarting the service or reinstalling the app.
Are both devices on the same Wi-Fi?
Your phone and your computer must be connected to the exact same Wi-Fi network. Check: phone is NOT on mobile data, computer is NOT on a different Wi-Fi or VPN.
Did you type the address correctly?
Open your computer browser and type the EXACT address shown in PlainApp. PlainApp may show multiple addresses — for example http://192.168.x.x:8080, https://192.168.x.x:8443, or plainapp.local. Try each one. Make sure you include the port number (the part after the colon, e.g. :8080 or :8443).
Did you see a 'Not Private' warning?
If your browser shows 'Your connection is not private' — that's normal! Click 'Advanced', then 'Proceed to site'. This happens because PlainApp uses a self-signed certificate for encryption. You can also try the http:// address instead to avoid this warning.
Still can't connect?
If the page won't load at all (timeout or refused), try the ping test below to check whether your computer can reach your phone, then read the detailed solutions.
Test if Your Computer Can Reach Your Phone
Open a terminal (Command Prompt on Windows, Terminal on Mac/Linux) and run this command with the IP address shown in PlainApp:
If you see replies (e.g. '64 bytes from ...'):
Your computer can reach the phone. The issue is likely a browser problem — try a different browser, check for certificate warnings, or make sure you're using the correct port number.
If you see 'Request timeout' or no response:
Your computer and phone can't communicate at all. This usually means they're on different networks, AP Isolation is enabled, or a firewall is blocking the connection. Check the solutions below.
Detailed Solutions
Still not working?
If none of the above solved your problem, try these last steps:
- Restart PlainApp on your phone (stop and start the service)
- Restart your Wi-Fi router
- Try a different browser on your computer
- Try connecting from a different device (another phone or tablet) to narrow down the issue
- As a workaround, you can use your phone's hotspot: turn on mobile hotspot on the phone, connect your computer to that hotspot, then open the PlainApp address